GruvenParts Brake Pedal Adjuster Gear (03-11 Sierra 1500)Find parts that fit my vehicle

Description. GruvenParts.com is proud to release these redesigned SOLID BRASS gears for the brake pedal adjustment mechanism found in many GM trucks from 2003-2011 (and possibly many more).

The OEM brake pedal adjuster unit in these vehicles uses a small, brittle plastic spur gear which is powered by an electric motor and serves to control the brake pedal position. Unfortunately, the OEM gear is made from brittle plastic and typically cracks apart rendering the brake pedal adjuster mechanism useless. Until now, the only solution was to source a complete new brake pedal adjuster unit for big bucks, then go thru the painstaking process of removing the dash to install a new OEM brake pedal adjuster unit - all to get another plastic, brittle gear. And you already know how that story will end !

DONT WASTE TIME AND MONEY BUYING A NEW BRAKE PEDAL ADJUSTER UNIT. GruvenParts.com has solved this issue by designing and building replacement gears made from SOLID BRASS WHICH CARRY A LIFETIME WARRANTY. The installation of our replacement solid brass gear is very easy and does not require dash removal.

Replace a weak OEM part with a bulletproof lifetime warrantied solid brass gear, save time and save money ! Win/Win/Win

Installation of this gear is very straight forward - remove the 3 torx screws holding the case halves together. The old plastic gear can be unthreaded from the screw shaft and the new brass gear can easily be threaded on. Replace motor and 3 torx screws and verify fitment by testing the adjuster unit.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov