FREE 1 to 3-Day Delivery on Orders $119+ Details
Best Sellers
How to Install Barricade 3 in. Bull Bar - Black on your Ram
PARTS LIST:
(1) – BULL BAR
(2) – BRACKETS (DRIVER/PASSENGER SIDE)
(6) – 7/16 X 1 1/4 HEX HEAD BOLTS (M10X30MM)
(6) – 7/16 HEX HEAD NUTS
(6) – 7/16 LOCK WASHERS
(12) – 7/16 FLAT WASHERS
PROCEDURE:
1 - REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2 - REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH FRONT BUMPER TEMPORARILY AND SET ASIDE.
3 - UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME RAIL (PASSENGER SIDE SHOWN) INSTALL LOWER BRACKET ONTO FRAME RAIL BOLTS *LEAVE LOOSE* (SEE FIG # 1)
4 - REPEAT PROCEDURE #3 ON OPPOSITE SIDE
5- INSTALL BULL BAR USING 6 - 7/16 X 1 1/4 HEX HEAD BOLTS, 6 - 7/16 HEX HEAD NUTS, 12 - 7/16 FLAT WASHERS ，(6) - 7/16 LOCK WASHERS *LEAVE LOOSE* (SEE FIG # 1)
6 - LEVEL AND ADJUST BULL BAR AS DESIRED. TIGHTEN & TORQUE BOLTS
7 - MEASURE AND TRIM LOWER URETHANE VALANCE AS DESIRED. REINSTALL VALANCE ON TO FRONT BUMPER.
