Talk to a Ram 2500 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$12k Summer Sweepstakes! Enter Daily>

Banks Power 3.50-Inch Monster-Ram Intake System with Fuel Line; Natural (07.5-18 6.7L RAM 2500)

Item HR42668
Product Image
Banks Power 3.50-Inch Monster-Ram Intake System with Fuel Line; Natural (07.5-18 6.7L RAM 2500)
Verify parts fit and get product recommendations.
Ram 2500 Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$459.00

FREE Shipping Market Price $527.85 You Save 13% ($68.85) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Columbus - 43215
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Information

      Description, Q&A

      Description


      FOR RACE USE ONLY.
      Does not have provisions for emissions equipment.
      For street-driven vehicles, choose Monster-Ram Gen 2.

      Key Features
      Optimizes air pressure and distribution going into the intake manifold
      Raises boost without increasing turbine drive pressure
      Includes Fuel Line and all necessary hardware
      Improves flow of oxygen-rich air into cylinders
      Larger and less restrictive than stock intake
      Accommodates stock mounting points
      Outflows stock over 110-133 percent
      3.5 inch CNC machined inlet
      Four 1/8 inch NPT ports
      Natural Bare Finish or Red Powder-Coated
      Specifications
      The Monster-Ram improves airflow from the intercooler and flows 906 cfm (69.22 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min). It raises boost without increasing backpressure at the turbine which results in a more responsive and power efficient engine. Up to four 1/8 inch NPT ports are pre drilled to measure pressure, temperature, or flow. The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass. Accommodates stock mounting points including Temperature and Pressure sensors, wire harness, and dipstick tube.

      At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance, and efficiency are the ultimate goals. To make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key.

      Our High-Ram intakes have always whipped the competition. Our new Monster-Ram flat-out destroys it. Monster ram is CNC ported to a full 3.5 inches and was designed utilizing the latest in electronic computational fluid-dynamic technology. Next it was tested on the flow bench and dyno, then finally proven in the real world where the rubber meets the road. The Monster-Ram is a beast that only Banks could have unleashed. A simple, direct-replacement casting, Monster-Ram is instant power, performance, and acceleration gratification.

      It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine.

      Fitment:

      Details

      Banks Power 42788

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Questions & Answers

      10 More Questions

      Will It Fit My Ram 2500

      • 6.7L I6 - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18