Axiom Supply Spindle Bolt (24-26 4WD Ranger)Find parts that fit my vehicle

Fitment:

_x000D_

This premium front bearing spindle bolt fits the 2021 - 2026 Ford Bronco

_x000D_

Fits:

_x000D_

2021+ Ford Bronco (non-sasquatch)
2021+ Ford Bronco (Sasquatch)

_x000D_

_x000D_
• _x000D_ 2021–2026 Ford Bronco_x000D_
  _x000D_
  • Engines: 2.3L, 2.7L, 3.0L
  _x000D_
  • _x000D_ Excludes Raptor models _x000D_
  _x000D_
  _x000D_
_x000D_
• _x000D_ 2024 Ford Ranger_x000D_
  _x000D_
  • AWD / 4WD configurations
  _x000D_
  _x000D_
_x000D_

_x000D_

Important Fitment Note:

_x000D_

Spindle bolts sold individually. 4 per side are required to be changed with each bearing replacement per Ford.  

_x000D_

Intended to be installed with replacement of each wheel bearing

_x000D_

Features:

_x000D_

Maintains factory ride quality when paired with proper components

_x000D_

Premium durable corrosion resistant finish

_x000D_

Description:_x000D_

_x000D_

A Premium Heavy Duty Spindle Bolt

_x000D_

These spindle bolts are engineered to securely fasten the wheel bearing to the spindle, ensuring a solid, vibration-free connection. Each bolt is designed to be torqued to 133 lb·ft, creating the clamping force required to keep your hub assembly tight and reliable under load.

_x000D_

Because of the extremely high torque, along with real-world exposure to rust, moisture, and road debris, Axiom Supply strongly advises replacing these bolts every time you service or replace your wheel bearings. Once a bolt has been torque-cycled and exposed to corrosion, it simply can’t guarantee the same clamping strength the second time around—and that’s a risk no truck owner should take.

_x000D_

Why Axiom Supply Chooses These as the Best Spindle Bolts for GM Trucks

_x000D_

At Axiom Supply, we refuse to cut corners on hardware. These spindle bolts are the exact style and grade we trust in our own shop and on our own builds. Here's why:

_x000D_

Maximum Holding Strength – GM hub assemblies see massive loads, especially on lifted trucks, work rigs, tow setups, and larger-than-stock tires. These bolts deliver the secure clamp force needed to keep everything tight, mile after mile.

_x000D_

Corrosion-Resistant Zinc Plating – The upgraded gold zinc finish combats oxidation, road salt, and moisture—crucial for trucks that see off-road use, winter weather, or coastal climates.

_x000D_

Consistency You Can Trust – Cheap or reused bolts can stretch, seize, or lose torque retention over time. These bolts provide reliable performance every installation, every torque cycle.

_x000D_

Required Hardware for Proper Bearing Replacement – Every wheel bearing swap changes the stress-loading on these bolts. Reusing old hardware introduces the risk of improper torque, alignment issues, or premature hub failure. New bolts eliminate that risk entirely.

_x000D_

In short: these are the bolts that keep your wheel bearings locked in place, your steering tight, and your truck safe—on and off the road.

_x000D_

Specs & Fitment Notes:

_x000D_

Sold Individually

_x000D_

2021 - 2026 Bronco: 4 bolts per side

_x000D_

Torque Specification: 133 lb·ft

_x000D_

Includes:

_x000D_

(1) Single Spindle Bolt

_x000D_

The Axiom No-Nonsense Lifetime Warranty

_x000D_

Our suspension and steering components are warrantied for life to the original purchaser against any manufacturer defects, premature wear, or breakage.

_x000D_

Push it to the limit—we don’t care.
If the part lets you down, we will make it up to you!

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov