Review & Install Video
The TruXport Tonneau Cover from Truxedo is available for any '09 to '14 F-150 owner looking to pick up a quality bed cover with a very easy-to-use and convenient roll-up style design. It does not require any drilling into the bed. This one here is gonna be one of the more mid-level options thanks to its tensioner system and weatherproof-like qualities and some of the entry level options just don't offer that kind of tension. Now, with that said, the install is gonna get a one out of three wrenches on the difficulty meter here. Shouldn't take longer than 30 minutes to an hour thanks to its very simple application. We'll talk more about that later on.Now obviously, taking a look at a bunch of Tonneau covers for your truck, you're probably, first off, wondering how each one retracts to open up the bed. Now, depending on what you use your truck for from time to time, you might be looking at one over the other. Now, a folding Tonneau cover will obviously be a little bit better for the oversized car you might be hauling, whereas a roll-up style is much easier to use here and it rolls back to the rear window perfect for any size cargo.Now. the ease of use is probably the top quality when it comes to this style of Tonneau cover, and this one in particular. This one uses a latching system on each side of the tailgate which will actually lock completely shut to bed rails that you'll install on the side of your bed. Now, to unroll it and open up your bed, obviously, unlatch each of those on each side of the tailgate and simply roll it up by hand thanks to the heavy-duty Velcro lining on each side. That'll go all the way back to the window where you can actually Velcro it shut to make sure it stays open all the time.Now, on top of that, you're looking at a manufactured system here, out of a very heavy-duty vinyl which can withstand all of the elements. It also includes a tensioner system built in from the factory here which allows you to adjust the tension on how tight it'll be to the sides of your bed, but it comes preset from the factory. Now, as I mentioned earlier, this is gonna be a mid-level option here. Now, of course, it's not gonna offer all the bells and whistles that a premium cover would with its double-coated vinyl. But it does give you extreme ease of use, protects against your all-year-round weather elements, and of course, thanks to the tensioner system, stays tight to your bed. It is gonna come around the $300 mark which is almost half of the premium options, but double those entry-levels, so it has its pros. With that said, it is gonna also come with a five-year limited lifetime warranty from Truxedo to protect it against any defects. Now, even though it doesn't come UV treated, that definitely does add some peace of mind. The installation, as I mentioned in the beginning, is very, very straightforward thanks to the bed rail supplied in the kit. Now, this will only require a ratchet and a half-inch socket set to get the job done and it only takes about 30 minutes or so from start to finish, definitely resulting in a one out of three wrenches in the difficulty meter. I will say it'll give you the selection for factory bed rails or nonfactory bed rails, make sure you're selecting the right one on the site at checkout.You can kick things off by installing the weather seal into the corner plug of the side bed rails. From there, place the roll-up Tonneau cover on the back of the bed and towards the rear window. Assemble the clamps, of course, and then install those very loosely to the rear end of the side bed rails on each side. From there you can assemble the corner plugs onto the header of the rail underneath the roll-up Tonneau cover. From here, just install the rest of the clamps into place, one in the middle, one by the end of the tailgate, repeat that for the opposite side, and tighten them down in that order. Once that's taken care of, you'll unroll the entire Tonneau cover, install the weather seal to the tailgate corner plug, and latch it into place at each side. Now, you'll just press down on each corner of the tailgate and hear a double-click to make sure it's engaged. If you wanna end up rolling it up at any point, obviously, just unlatch each side roll it up by hand, thanks to the Velcro ends, and tighten it back for the rear window, and you're good to go. So, if you're the owner of an '09 to '14 F-150, you might wanna check out the Truxedo TruXport Tonneau Cover available right here at americantrucks.com.
Protect Your Truck Bed.
Your 2009-2014 F-150 truck bed is one of the most useful tools at your disposal, so you don't want to leave its care up to chance. When the weather is nasty or you need to keep potential thieves from seeing what you're hauling, this Truxedo TruXport Tonneau Cover is a convenient, quality option. Roll Out With Confidence.
Made out of durable vinyl, this TruXport Tonneau Cover is strong. It can withstand the elements and ward off intruders with its tough appearance. The cover boasts an adjustable tension system control too, so you can secure it tightly whenever you need to. Convenient Design.
This cover is simple to use thanks to its roll-up design. There's no planning or hard work needed, just roll it out when you want a cover and roll it right back to the back of your cab when you need more access to the truck bed. The cover secures to the truck bed with heavy-duty Velcro for your convenience. Application.
This Truxedo TruXport Tonneau Cover is the perfect fit for your 2009-2014 Ford F-150. Please select your proper fitment from the ordering options above.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- What's in the Box
- (1) TruXport Tonneau Cover
- Installation Info
(approx) 20 Minutes
Simple installation for anyone
- Will it fit my F-150?
- 3.5L V6 EcoBoost - 11, 12, 13, 14
- 3.7L V6 - 11, 12, 13, 14
- 4.6L V8 - 09, 10
- 5.0L V8 - 11, 12, 13, 14
- 5.4L V8 - 09, 10
- 5.4L V8 Raptor - 10
- 6.2L V8 - 11, 12, 13, 14
- 6.2L V8 Raptor - 10, 11, 12, 13, 14