(approx) 30 Minutes
Simple installation for anyone.
What's up, guys? Sara from americantrucks.com, and today we have a review and install for the Truxedo Lo Pro Soft Roll-Up Tonneau Cover, fitting your 2019 and newer RAM. This tonneau is one of the most low-profile options out there, and it will give your truck the sleek after-market look. This tonneau features a hook-and-loop fastening system with adjustable tension, keeping the cover in place. This tonneau rolls all the way up, giving you full access to your truck bed, and can be operated in the open or closed position. This tonneau is constructed from industrial leather grain fabric in a black finish and features an aluminum frame. Coming in at around $500, this is a middle-of-the-road as far as tonneau covers go. It's definitely not the least expensive option, but it is one of the most low-profile options out there, and it is still less expensive than some of the hard covers.I'm giving this install a one out of three wrenches on the difficulty meter. It will take approximately 30 minutes to install, and it goes in and removes very quickly with no damage to your truck's bed. For this install, you will need a 3/8 drive ratchet and a 1/2-inch socket.Okay, so the first step in your install is you're gonna wanna grab the driver's side rail. This one is the one set up in this configuration and has the latch on the end of it. Once we have this, it's easiest to do it with the bed closed. We're gonna line it up and smoosh it down into our bed. There is weather stripping on all sides, so it is gonna be a pretty tight fit, but that's good news for our cover's function later on.All right, grabbing our clamp with the tab in the lower slot, we can go ahead and put it about 6 inches from the front of our bed. Again, this is a lot of adjustability, so around where you think is good is gonna work. Once we have it in place, we can grab our 1/2-inch socket and get it tightened down. We wanna leave it a little bit loose until we get the rest of them in, and then completely tighten all three all the way.With our first bracket in place and tightened down a little bit, we can move on to our second bracket. This one's gonna go right about the middle of the truck. Try to get it as far up as you can on either side, just for the best amount of service area to grab. Get your 1/2-inch socket. We can go ahead and tighten these down. Moving on to our third bracket. All right, our third bracket is gonna go about 6 inches from the end of the bed of our truck, about as even as we did on the first one. So, go ahead and place that, and then we can grab our 1/2-inch socket and get it tightened down.All right, with all three brackets in place, you just wanna double check fitment, and then you can tighten them down the rest of the way. Now, we can go ahead and tighten these down the rest of the way. All right, now we're gonna repeat the same steps on the passenger's side, lining up our rail, and grab our brackets.All right, lining up this bracket about 6 inches from the front of the bed, we can go ahead and get it into position, about 6 inches from the front of the bed like we did on the other side. Grab your 1/2-inch socket, and get it tightened down. All right, grabbing our cover with the bracket side down, we can go ahead and place it at the front of our truck. You're gonna wanna place the cover with this weather stripping down on the front of the bed, here, and this part is gonna tuck right in here.Once that is in place, you wanna grab this bracket and push it forward. This locks the cover in place. Go ahead and do the same thing to the other side, sliding this bracket in. Now we're ready to roll the cover out. With everything in place, we can go ahead and roll our cover out. All right, with the edges of our cover in each of the sides of the grooves of the rails, we can go ahead and shut it.Okay, so that is gonna do it for the review and install of our Truxedo Tonneau Cover. Remember, for all things RAM, keep it at americantrucks.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Style and Security. Don’t you just hate it when your cargo winds up wet, or worse stolen? With Truxedo’s Lo Pro Soft Roll-Up Tonneau Cover, you don’t have to worry about that ever happening. Built with a convenient soft roll-up design, this tonneau cover provides exceptional protection from Mother Nature and would-be thieves. The secret lies behind the single trigger latch, along with the hook and loop fastening system. This hook and loop system provides a tight seal around your truck bed to prevent unwanted access and the single trigger latch locks the cover in place until you open your tailgate. In addition, the low-profile design of this tonneau cover improves your Dodge RAM’s appearance without affect handling and performance.
Soft Roll-Up Tonneau Cover. The soft roll-up design of this Truxedo Lo Pro Soft Roll-Up Tonneau Cover allows you to access your cargo faster than hard tonneau covers. Opening this cover is as easy as a flick of your finger thanks to Truxedo’s single trigger latching system. In addition, the adjustable tension control allows you to keep this Truxedo Lo Pro Soft Roll-Up Tonneau Cover tight even in fluctuating temperatures.
Solid Construction. Truxedo constructed this Lo Pro Soft Roll-Up Tonneau Cover using high-quality leather-grain fabric. This tear-resistant fabric underwent strict manufacturing processes to ensure it won’t puncture or tear after taking a beating or being subjected to extreme weather conditions. Supporting this tonneau cover is a frame made from solid aluminum alloy and coated with a smooth black finish.
No Hassle Installation. When it comes to installing this Lo Pro Soft Roll-Up Tonneau Cover, you can thank Truxedo for making the installation process completely bolt-on. You don’t have to waste precious time drilling holes, all you have to do is bolt this tonneau cover onto your Dodge RAM and you’re good to go.
Protected by a Lifetime Warranty. To ensure the quality of this Lo Pro Soft Roll-Up Tonneau Cover, Truxedo protects it with a Lifetime warranty. The complete coverage information of this warranty can be found in Truxedo’s official site.
Application. This Truxedo Lo Pro Soft Roll-Up Tonneau Cover can fit all 2019-2020 Dodge RAM 1500 models.
Shop All Truck Parts And Accessories
Shop All Truck Bed And Tonneau Covers
Shop All Truck Exterior Accessories
Fitment: 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions
It is not Compatible on RAM 1500 Classic Models, fits the New Body Models Only.