20-Piece Steering, Suspension and Brake Kit (99-06 4WD Sierra 1500 w/ Rear Disc Brakes)

Bearing Type: Tapered Roller Bearing
Kit Includes:
(2) Front Sway Bar Links
(2) Front Lower Ball Joints
(2) Front Outer Tie Rods
(1) Idler Arm
(1) Pitman Arm
(2) Front Inner Tie Rods
(2) Front Upper Control Arms with Ball Joints
(2) Front Brake Rotors
(1) Front Ceramic Brake Pad Set with Contact Point Grease & Hardware
(2) Front CV Axle Assemblies
(1) Idler Arm Bracket Assembly
(2) Front Wheel Bearing & Hub Assemblies


What are Tapered Bearings and Why Use Them? Tapered bearings use rollers shaped like flat-topped cones and two races angled from the outside in of the bearing. This angle makes the bearing better at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. Your model came from the factory with tapered bearings. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing increases wear and failure.

Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

Item Condition: New
Attention California Customers:

proposition 65 iconWARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Fitment:

• 1999 GMC Sierra 1500
• 2000 GMC Sierra 1500
• 2001 GMC Sierra 1500
• 2002 GMC Sierra 1500
• 2003 GMC Sierra 1500
• 2004 GMC Sierra 1500
• 2005 GMC Sierra 1500
• 2006 GMC Sierra 1500

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov