Max Trac 5-Inch Front Lift Spindles with Extended Brake Lines (16-18 2WD Sierra 1500 w/ Stamped Steel or Cast Aluminum Control Arms)

Get the Right Off-Road Control. Getting the right ground clearance to stampede the off-road boulders is now easy; thanks to the newly designed Max Trac 5" Front Lift Spindles w/ Extended Brake Lines. If you're the sort who love an elevated truck stance, then these spindles will allow you to install up to 33" tires w/ 17" larger wheels. Also, they are a simple lift modification with a mere bolt-on process.

Enhanced Off-Road Performance. Unlike 4WD spindles, each spindle relocates the wheel's bearing 5" down, to achieve the intended lift. After lowering the wheel's bearing, the spindle positions in front of the lower control arm, allowing the wheel to run smoothly.

Intimidating Exterior Look. Your lifted Sierra can acquire an enhanced exterior appearance, for Mac Trac spindles accommodate larger wheels, while increasing the track width an inch on each side to provide an off-road-ready stance. There are endless options! This kit also allows you to mount 17" rims or larger with a backspacing of 4-3/4" or less.

Installation. This Max Trac 5" Lift Spindle Kit ships with an installation guide. Mounting it involves pure bolting. Regardless, you may have to perform a bit of trimming for fender clearance. The process takes about 2 hours.

Warranty. Mac Trac provides the original product end-user with a Limited Lifetime Warranty for their spindles to the original buyer.

Application. Max Trac 5" Front Lift Spindles with Extended Brake Lines fits all 2016-2018 GMC Sierra 1500 models with Stamped Steel or Aluminum Suspensions.

Shop All 1 to 2 Inch Truck Lift Kits

Shop All Truck Parts And Accessories

Shop All Truck Lift Kits

Fitment:

• 2016 GMC Sierra 1500
• 2017 GMC Sierra 1500
• 2018 GMC Sierra 1500

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov