How to Install Husky Classic 2nd Seat Floor Liner - Black on your Sierra

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat(s) before installing your new floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

NOTE: IF YOUR TRUCK IS EQUIPPED WITH THE 40/20/40 FRONT BENCH SEAT, YOU WILL NEED TO TRIM AWAY A SECTION OF YOUR LINER. THIS IS EASILY DONE USING A UTILITY KNIFE OR PAIR OF HEAVY SHEARS. SIMPLY USE THE MOLDED IN GROOVE IN THE LINER AS YOUR TRIM GUIDE, REMOVING THE PORTION OF THE LINER ON THE “HUMP” PORTION OF THE LINER AS SHOWN ABOVE. MORE PHOTOS OF THE PART ARE ATTACHED ON THE BACK OF THIS PAGE.