Talk to a Sierra 1500 Sales Tech
1-888-706-1096
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install SLP 3.5 in. Dual Exhaust Tip Assembly - Polished on your Sierra

Installation Time

1 hours

Before installation, use this check list to make sure all necessary parts have been included.


WARNING: SLP Recommends allowing the vehicle to cool (not running) for five hours before beginning installation.

INSTALLATION INSTRUCTIONS – #31093

1 Begin the install by measuring 1.75” rearward from the factory exhaust hanger on the tailpipe and make a clear mark, then cut off the factory pipe. Slide the SLP adapter pipe over the factory pipe with the supplied 2.75” Torca clamp on the SLP pipe, see Photo 1 below.


2 Install the tip onto the SLP pipe with 2.5” Torca clamp and then tighten all clamps after adjusting the system as desired. See Photo 2 Below.


3 The installation is now complete! ENJOY!

Best Sellers