Fabtech Aluminum Uniball Upper Control Arms with Bearing Rod Ends for 0 to 4-Inch Lift (19-26 Sierra 1500 AT4)

Better Than OEM UCA’s. Is it time to replace your factory upper control arms? Well, consider these Sierra 1500 Aluminum Uniball Upper Control Arms by Fabtech. With these UCA’s, you’ll have a more adjustable wheel alignment and better front suspension performance. Plus, its attractive finish will glam up your vehicle.

Built for Off-Roading. Fabtech’s Aluminum Uniball Upper Control Arms have been meticulously constructed to handle rough off-road driving. Some design features include its FK Uniball bearings equipped with PTFE lined, 1-Inch Stainless Steel. The Uniball Pins fit the stock BJ taper with heat-treated, 17-4 stainless steel. Meanwhile, 3/4-Inch stainless steel FK helm ends prevent defection. The overall construction is reinforced with thick cross-sections made from 6061 Billet Aluminum. These Uniballs can accommodate increased wheel travel when installed with Dirt Logic Coilover shocks.

Mount-On Installation. Installing these UCAs is reasonably straightforward and involves no drilling, welding, cutting, or driveshaft modification. Using the hardware provided, the components are mounted to your vehicle’s underside upper front wheel area.

Limited Lifetime Warranty. Fabtech is certain that its product will arrive free from faults in materials and defects. Therefore, they have backed it with a limited lifetime warranty. For complete coverage information, visit Fabtech’s website.

Application. The Aluminum Uniball Upper Control Arms with Bearing Rod Ends is compatible with the GMC Sierra 1500 models built between 2019-2026. It is not suitable for the Chevy Silverado LD 2019 or GMC Sierra Limited 1500 models.

Installation Difficulty. These UCAs can be installed in your home garage using basic tools, and the process will take approximately 1-2 hours to complete.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov