BD Power Remote Exhaust Brake with Non-VGT Turbo and 5-Inch Exhaust Kit (07-17 6.7L RAM 3500)

Description.

It has been almost 30 years since we started shipping our first exhaust brakes. With that many hill and mountain roads experienced, we used the knowledge gained to continue to deliver the best designed exhaust brake for your application. Incorporating BD's exclusive Variable Orifice Technology, BD's solid, offset butterfly, spring loaded cylinder and pressure regulation provides up to 150 retarding horsepower throughout the engine's RPM range - not just at high rpm like some designs that use holes or additional parts and claim it as a better idea. A range of rugged, cast-iron housings for Dodge, Ford, Chevy and motor home applications that incorporate BD's exclusive alumibronze bushing, piston ring-seals and stainless steel butterfly shaft has proven to stand-up under the harsh, high heat conditions of the exhaust environment. BD's butterfly valve and rotating shaft are made of stainless steel to resist corrosion. An air compressor is included in most kits for newer pick-up trucks.

FEATURES

Ideal for applications where installed aftermarket performance turbo will not facilitate turbo mount exhaust brake

BD's exclusive Variable Orifice Technology

BD's solid, offset butterfly

Spring loaded cylinder

Pressure regulation

Provides up to 150 retarding horsepower throughout the engine's RPM range

Rugged, cast-iron housings

BD's exclusive alumibronze bushing

Piston ring-seals

Stainless steel butterfly shaft

Proven to stand-up under the harsh, high heat conditions of the exhaust environment

All mounting hardware are made of corrosion resistant stainless steel

Air compressor included

There's a reason why the BD Brake is the most widely-recognized diesel exhaust brake in the industry: It's the best! Compare it to the competition, and you'll see why.

INSTALL TIME

4 Hours

WARRANTY

Parts

24-Months

24,000 Miles

Labour

12-Months

12,000 miles

NOTE

Currently this product has been tested with Bullydog and H&S tuners. Please check with your tuner if using EFI (EZ Lynk) or HP Tuners as these products have been known to have compatibility issues.Exhaust Back Pressure test gauge kit 1030050 suggested for the set-up of exhaust brakes

If truck has no factory exhaust brake switch on dash, order kit 1027340 instead

Will work on 2018-up models but requires special engine tuning - refer to installation manual for details

EMISSIONS

This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)

Fitment:

• 2007 Dodge Ram 3500
• 2008 Dodge Ram 3500
• 2009 Dodge Ram 3500
• 2010 Dodge Ram 3500
• 2011 Dodge Ram 3500
• 2012 Dodge Ram 3500
• 2013 Dodge Ram 3500
• 2014 Dodge Ram 3500
• 2015 Dodge Ram 3500
• 2016 Dodge Ram 3500
• 2017 Dodge Ram 3500

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov