Rocker Panel Molding; 4-Inch x 20-Foot (Universal; Some Adaptation May Be Required)

Stylish Protection for Lower Bodywork. This 20-foot length of rocker trim shields paint from gravel chips, salt spray, and scuffs, preserving your vehicle’s finish and resale value. The matte black extrusion complements body colors while adding a rugged accent along the rocker panels.

Durable, Weather-Resistant Material. Engineered from UV-inhibited PVC, the molding resists fading and cracking in sun, rain, or snow. The 3M adhesive forms a strong bond to primered or painted steel and aluminum surfaces, and the flexible profile conforms to curves and contours without creasing.

Installation. Clean and degrease the rocker area, measure and trim the molding to length, peel back the adhesive liner, align edge to panel line, press firmly along the length to secure, and allow 24 hours for full adhesion.

Application. The Rocker Panel Molding; 4-Inch x 20-Foot fits universal rocker panels; trimming for specific vehicle width and contour is required.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov