(approx) 2 Hours
Simple installation for anyone.
$395.95 (pair)+ $25.00 Handling Fee with FREE Shipping
Hey, guys. It's Joe from AmericanTrucks. And today, we're gonna be talking about the N-Fab EpYx Cab Length Nerf Side Step Bars in textured black, fitting all '19 and newer ram 1500s with a Crew Cab. Now this is gonna be a great option for you if you're looking for simply put the easiest way to get in and out of your Ram, you don't care about clearance, you're looking for a high quality sidestep bar to make getting in and out as easy as possible. So what do we have going on here with the EpYx? Well, first off, let's talk build quality. These are made out of a high-quality steel finished in that textured black powder coating, perfectly matches the black accents on our new Ram, but it's also gonna serve as a layer of protection against the elements. Now the big draw with the EpYx, it's gonna be these drops steps. Now right off the bat here, I do want to address, these are gonna steal some clearance. If you plan on doing any off-roading, just be mindful that these aren't gonna drop down really, really far in comparison to any other side step out there. Now with that said, these are gonna be the easiest way to get in and out of your truck, that drop step makes it so easy. If you're the daily driver, these are gonna be perfect. If you have a lifted truck, that is really tough to get into, these can be a perfect fit for you. That step might just come down enough to make getting in and out of your truck easy again. Also, those steps do have some non-slip padding on there, they give you about three and three quarter inches worth of area to plant your foot and it's a perfect step even in wet or muddy conditions, you're gonna be able to get some good footing on that drop step. Now one thing I'm really happy to report about these side step bars, there's not an inch a plastic anywhere on the EpYx, which is surprising given the price point right around 400 bucks, you usually would expect to see that, these are definitely more toward the budget-friendly side, but all steel in their construction, these are definitely gonna last a long time well worth the money. So let's get to the good stuff here, the install. Let me show you how to get these on your truck. Before we do I did just want to make a quick note that these are only intended to fit the 5th generation of Ram, so if you have a 4th-gen truck that's the 2019 classic, these are not gonna work out for you. But with that said, the install is gonna be really, really easy, one out of three wrenches on our difficulty meter, should take you at most an hour or two to get both sides done with some basic hand tools. So without any further ado, let me show you what tools you'll need and how it's done. Tools required for this install are gonna be a ratchet, 13 and 14-millimeter sockets, one that's not required but highly recommended, a wire brush, Dodge paints over the studs and something like this can help clean up the threads before you put the hardware on. So unlike most side step installs, this one is gonna start on the table mainly because we're going to install our mounting brackets to the rail first. We're gonna use these button head bolts with the square shoulder underneath, we're gonna come up from behind and then basically our mounting bracket is gonna sit on like so and then we're gonna tighten it down with the 14-millimeter nuts from the other side. Now these are pretty well slotted, so if we do need some adjustment later on, we could always loosen these back up, make an adjustment and then tighten them back down. But for now, we're gonna aim for the middle and tighten down with a 14-millimeter socket. Now we're gonna do that for the other two positions on this step as well. Now those can be a little bit tricky to install. Thanks to our editors, they probably cut out most of the footage there of me struggling with that hardware. The best thing I could recommend for you to do is just let gravity help you out, tilt this thing upside down and just to let those bolts fall into place and then get the nuts threaded on from the bottom up. But now this is pretty much situated, we're just gonna hold the whole thing up to our Ram, we're gonna get this seated in the studs underneath the truck and then tighten down with the 13-millimeter hardware included in the kit. So now we have this situated after a few quick adjustments, we're just gonna run these 13-millimeter nuts on and tightened down with the 13-millimeter socket. These holes are slotted as well, so we're just gonna push this up as we do so as well. We're gonna do the same thing for the middle and rear bracket as well. The install is gonna be the same exact process over on the other side. But that's gonna do it for me, it's also gonna do it for the N-Fab EpYx Cab Length Nerf Side Step Bars in Textured Black, fitting all '19 and newer ram 1500s with the Crew Cab. As always, thank you guys for watching. If this video helped you out at all, leave us comment down below. Subscribe for more like this one. I'm Joe. Keep it right here at AmericanTrucks for all things Ram.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
For Safer, Quicker, and Easier Vehicle Access. With N-Fab’s EpYx Cab Length Textured Black Nerf Side Step Bars, you’ll have a more comfortable time getting in and out of your Dodge RAM 1500 truck. Not only do they come in an angular style, but the bars also feature drop down steps that are positioned at each door. Thanks to this feature, almost anyone can access your vehicle with ease. In addition, they’re covered in a black powder coat to help boost your truck’s off-road-ready looks.
Made Out of Premium Quality Steel. Thanks to their high-quality steel construction, these EpYx Cab Length Nerf Side Step Bars are remarkably sturdy and long-lasting. They’re also covered in a black powder coating, so they won’t easily chip or get scratched, even if they’re constantly exposed to the elements.
A No-Drill Install. Installing these side step bars is a quick and easy task. This is because the bars’ mounting hardware is included and each bar doesn’t need to be drilled to the truck.
Includes a 5-Year Limited Lifetime Workmanship Warranty. These side step bars are backed by N-Fab’s 5-year limited lifetime workmanship warranty. Please visit the manufacturer’s website to know more about the warranty’s terms and conditions.
Application. N-Fab’s EpYx Cab Length Textured Black Nerf Side Step Bars are compatible with all 2019-2021 Dodge RAM 1500 Crew Cab models.
Shop All Truck Parts And Accessories
Shop All Truck Exterior Accessories
Shop All Truck Side Steps And Nerf Bars
Fitment: 2019 2020 2021 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 2 Hours
Simple installation for anyone.
What's in the Box
10 More Questions
It is not Compatible on RAM 1500 Classic Models, fits the New Body Models Only.