(approx) 1 Hour
Simple installation for anyone.
$74.99FREE Shipping on orders over $75
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
It's Joe from American Trucks, and in this video, we're going over the Husky custom molded front and rear mud guards fitting all '19 and newer Ram 1500s. Now, this is gonna be a great mod for you if you're looking to get a little bit of extra protection from debris thrown up by the tire with a set of budget friendly yet still custom molded mud guards. So what are these made out of? And that is going to be a very durable impact resistant thermoplastic that's designed to take a hit for your paint. They have a really nice matte black finish which looks perfect on the side of the '19 Ram and matches all the black trim really nicely and I think it integrates really well with this plastic trim piece right here. This kit also includes a nice little bit of paint protection film. It's made by 3M, it sits right in between this mud guard and where it rides on the paint to prevent any unwanted rubbing. After all, the whole idea here is to protect your paint and this kit goes the extra mile to include that. As long as you have no crazy negative offset going on, these will cover pretty much the entire tread width and they'll do a good job at catching anything that's pulling up.Pricing for the kit, and this is going to include all four corners, you're going to drop in right around 80 bucks, which in my opinion, is a very, very small price to pay for what these are going to give you. If you're looking to preserve your paint in any way, you're looking to keep your truck for the long haul, this is definitely a good buy. Before we move on to the install, I do wanna make a couple of quick notes here. This is designed to fit the 2019 re-designed 5th Gen Ram. So if you have a 2019 Classic this will not fit on your truck, but there are other options available from Husky that do. Secondly, there's two versions of these mud guards available, one for trucks without the fender flare as you can see right here, and one that's designed for trucks with the factory fender flare. Make sure you pick the right one before you pull the trigger on a set of these.Install here is gonna be really simple. I'm gonna give it an easy one out of three wrenches on our difficulty meter, should take you at most an hour to get all four sides done. Now, there are no modifications required. There is a little bit of optional drilling. If you don't wanna go that route, the kit does include some 3M double-sided tape for you. But without any further ado, let me show you what tools you'll need and how it's done. Tools you'll absolutely need for this install will include a ratchet and 8 millimeter socket. Now, not pictured here will be cleaning supplies, you wanna make sure your truck is nice and clean to make sure the adhesive sticks really well. Conversely, you can always hard and mount this. If so, you'll need a drill, a drill bit, and Phillips head screwdriver. So before we get started here, one thing I do wanna mention is this sort of factory mud guard that's on there right now, we're not removing this. Our Husky guards are going to go right around it and basically incorporate into that. However, we do have to remove some hardware out of it to make room for our new mud guards. We're gonna grab our ratchet and the 8 millimeter socket to do so. And we are gonna be reusing this hardware so keep it handy. We're gonna have to remove that bottom one, this one. And lastly, the one at the top.Now that we have the hardware out, we're just about ready to apply our new mud guards. Before we do, we gotta drop in our paint protection film. It's basically gonna go on to this edge right here and straight up just to protect this small area right here. Now, in our case, I'm just going to drop it on. In your case, you wanna make sure this area is nice and clean. Some isopropyl alcohol would probably do you really well right here. Now, you're also going to wanna clean sort of the fender liner area. Basically, this side of the mud guard is going to attach with 3M double-sided tape. Once you get that clean, you can peel off the backing and this is just gonna go right over top of that factory mud guard. And to finish the install, we're just gonna reinstall that factory hardware.Now, if you're not comfortable with that 3M tape, like I said earlier, you can drill and hardbound the other side of this, and here's the hardware you would use. You can see we have a small threaded clip right here. All you do is drill an eighth of an inch hole, put that threaded clip over it and then you can run in this Phillips screw to secure the other side. With all that done, you can move on to the front. The front is gonna be the same process. We're gonna remove these three 8 millimeter screws. Now, we're gonna close clean up the area a little bit, apply our paint protection and reinstall. Don't forget to peel off the backing for the 3M double-sided tape and clean off the area that it's gonna stick to, then you could drop that in place and tighten it down using the 8 millimeter screws.Now that you have the driver side done, you're just gonna repeat the same exact process over on the passenger side. But that's gonna do it for my review and install of the Husky custom molded front and rear mud guards fitting all '19 and newer Ram 1500s. Thanks for watching. Keep right here at American Trucks for all things Ram.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Additional Protection. Are you always driving over rough and muddy trails? If so, you’re going to need these Husky Custom Molded Front and Rear Mud Guards. These mud guards provide additional protection from mud and road debris that can do damage on your 2019-2021 Dodge RAM 1500’s paint job. The sleek style of these mud guards will give your Dodge RAM a unique look while protecting its finish.
Durable Construction. These Husky Custom Molded Mud Guards are constructed using impact-resistant, thermoplastic materials. This gives these mud guards the strength and durability it needs to prevent rocks, stones, and mud from damaging your Dodge RAM’s paint job. Coating these mud guards is a sleek black finish gives your Dodge RAM an aggressive, off-road look.
Simple Installation. These Husky Custom Molded Mud Guards are designed for bolt-on installation, but if you want to add an optional fastener some drilling may be required. Installation can be done in your garage in about an hour.
Comes With a Lifetime Warranty. These Husky Custom Molded Mud Guards come with a lifetime warranty on materials and workmanship. To find out more, please refer to the manufacturer’s official site.
Application. These Husky Custom Molded Front and Rear Mud Guards will fit all 2019-2021 Dodge RAM 1500 models.
Shop All Truck Parts And Accessories
Shop All Truck Exterior Accessories
Shop All Truck Mud Flaps
Fitment: 2019 2020 2021
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
10 More Questions