Ford Truck Hawk Ceramic Rear Brake Pads (04-08 F150)

Hawk performance has introduced a premium, high performance brake pad called Performance Ceramic and it is being brought to you by AmericanTrucks.com. Ceramic brake pads combine ultimate stopping power with ultra-low dust and noise, providing you with the most wanted combination. Now you can stop on a dime while enjoying clean wheels and a quiet ride!

Performance Ceramic is engineered to reduce vehicle brake NVH (Noise, Vibration and Harshness), creating a quieter performing brake pad for your truck or SUV. Furthermore, the ceramic formula has a linear friction profile that allows your truck's ABS brake system to work more effectively.

Ceramic Key Features:

• Increased stopping power
• Increased rotor life
• Extended pad life
• Ultra-low dust
• Extremely quiet
• Stable friction output

Fitment: 2004-2008 Ford F-150s, Rear Pair

Important Note: Hawk Performance burnishes its Performance Ceramic brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface, to maximize brake performance. In order to properly bed-in/burnish your brake pads, follow these instructions.

Burnishing Instructions:

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.